RED DSMC2 DRAGON-X CAMERA KIT RED DSMC2 DRAGON-X CAMERA KIT RED This RED DSMC2 DRAGON-X Camera Kit is part of the RED unified DSMC2 lineup and includes the RED DRAGON-X BRAIN, as well the minimum gear you need to make a functional shooting package. The DRAGON-X BRAIN features a Super35 sensor and can shoot and record at 6K uncropped up to 75 fps. The kit includes the Sigma 18-35mm f/1.8 DC HSM Art Lens and an aluminum Canon EF mount with electrical contacts that pass metadata and allow for electronic control of EF mount lenses. The included V-lock expander module allows you to power the camera and provides HDMI and SDI outputs, as well as other interfaces.The RED Touch screen mounts directly on the BRAIN with no cables and provides you with a viewing screen, allowing you to set up and control the camera. The IDX batteries power the camera, and the charger allows you to charge both batteries simultaneously. The 480GB RED MINI MAG captures your footage and supports data rates up to 300 MB/s, and the included reader enables transferring your footage off the MINI-MAG. The Outrigger Handle provides a handgrip, and the included case is designed and built to hold your camera and accessories safe during transport and storage. RED DIGITAL CINEMA DSMC2 BRAIN with DRAGON-X 6K S35 Sensor Bundling high-performance raw video recording in a compact camera body, the RED DIGITAL CINEMA DSMC2 BRAIN with DRAGON-X 6K S35 Sensor is part of RED's unified DSMC2 lineup. Nearly limitless lens options are available for the DSMC2 system. While this camera requires a separately available lens mount, DSMC lens mounts themselves are offered in different varieties for compatibility with a wide array of lens systems.REDCODE RAW is the format of choice for DSMC2 cameras. RED's versatile raw codec uses wavelet compression to reduce data rates while maintaining a visually lossless image rendering. This efficient codec can be edited on many available NLE software programs without transcoding; though if you prefer, you can record to ProRes or DNx as well. Lowering the recording resolution allows the sensor to capture higher frame rates for dramatic slow-motion footage. The DSMC2 cameras use sensor windowing to record slow motion in lower resolutions, requiring wider- or smaller-format lenses to compensate for the additional crop. Recording rates range from 12 fps and up, including 24/25/30/48/50/60 fps and higher. Firmware 7.3.0 With the advent of firmware 7.3.0, the DRAGON-X sensor becomes a 6K sensor with a resolution of 6144 x 3160 that can shoot at up to 75 fps. If your camera does not have Firmware 7.3.0 or later, you can download it from RED Digital Cinema. DRAGON-X 6K S35 Sensor The DRAGON-X 6K Super 35mm sensor is a 19.4MP CMOS sensor that features a dynamic range of 16.5+ stops and a resolution of 6144 x 3160. REDCODE RAW The cornerstone of RED's workflow is the robust REDCODE RAW file format. Using wavelet compression with ratios ranging from 2:1 to 22:1, REDCODE RAW offers the versatility of raw files without the overwhelming storage requirements of uncompressed image data. Since REDCODE RAW has been around since the days of the RED ONE cinema camera, many common NLE software programs including Adobe Premiere Pro, Blackmagic Design DaVinci Resolve, Apple Final Cut Pro, and Avid Media Composer can import and edit REDCODE RAW footage without transcoding, saving production time in the edit suite. Capture rates range from 12 fps and up, including 24/25/30/48/50/60 fps and higher options.   Note: Not all compression ratios are available at all resolutions and frame rates Apple ProRes and Avid DNx Formats For projects requiring proxy files or quicker turnaround times than raw files permit, Apple ProRes or Avid DNx formats can be recorded at 4K and 2K resolutions directly to the onboard MINI-MAG media. Since these debayered video files can be recorded alongside the raw files, no extra time is required for transcoding the proxies. Bring the debayered files straight into your NLE and begin editing. DSMC2 Form Factor Like the preceding DSMC cameras, RED designed the DSMC2 camera line to be modular to fit a wide range of production workflows. Smaller and lighter than the original DSMC design, when stripped down to the BRAIN itself, you have a high-resolution gimbal workhorse. Likewise, add DSMC2 modules to the rear to gain professional I/O connections and battery power. Many other parts of the DSMC2 design are meant to be interchangeable. Swap out the lens mounts to open up new libraries of lenses. Exchange the included standard OLPF (Optical Low-Pass Filter) for alternative image renderings at the sensor level. Mount an EVF without cables that can get snagged, or use a separately available adapter to attach RED LCDs via LEMO cable. Since the DSMC2 form factor is standardized, any accessories that you have for this DSMC2 body will work with any other DSMC2 body, should you upgrade or acquire an additional body in the future. Color Management Supports 33x33x33, 32x32x32, 26x26x26, and 17x17x17 3D LUTsVariable number of 3D LUT outputs with DSMC2 expander moduleUser-programmable shaper 1D LUTsTetrahedral interpolation, 16-bit processing UPC: 856672007348 Sigma 18-35mm f/1.8 DC HSM Art Lens for Canon EF Distinguished by a uniquely fast and versatile design, the Canon EF-mount Sigma 18-35mm f/1.8 DC HSM is an Art-series zoom, covering wide-angle to normal focal lengths. Separating itself from the pack, this zoom features an exceedingly bright f/1.8 constant maximum aperture, which suits its use in difficult lighting conditions and offers impressive depth of field control throughout the zoom range. The optical design incorporates a series of SLD and aspherical elements, which help to achieve high clarity and sharpness by suppressing various aberrations, color fringing, and distortion. A Super Multi-Layer Coating has also been applied, too, which controls lens flare and ghosting for improved contrast and color accuracy. Balancing the optical merits, this 18-35mm also sports an advanced Hyper Sonic Motor, along with an internal focusing design, to promote fast, quiet, and precise autofocus performance. As part of the Art line within Sigma's Global Vision series, this lens is designed to achieve truly notable optical performance and is ideally suited for creative and artistic applications. Wide-to-normal zoom is designed for APS-C-format Canon EF-mount cameras and provides a 28.8-56mm equivalent focal length range. Impressively bright constant f/1.8 maximum aperture is well-suited for working in low-light conditions and also provides greater control over the focus position when using shallow depth of field techniques. Five Special Low Dispersion (SLD) elements are featured in the optical design and help to reduce color fringing and chromatic aberrations for improved clarity and color accuracy. Four aspherical elements are used to help limit distortion and spherical aberrations and also contribute to greater overall sharpness and accurate rendering. A Super Multi-Layer Coating has been applied to lens elements in order to minimize lens flare and ghosting and contribute to producing contrast-rich and color-neutral imagery, even in backlit conditions. Integrated HSM (Hyper Sonic Motor), along with an internal focusing system, realizes quick and quiet autofocus, which is further complemented by an optimized AF algorithm to produce smoother focusing performance. The HSM also permits full-time manual focus control simply by rotating the focus ring at any time. Rounded nine-blade diaphragm contributes to a smooth and pleasing bokeh quality. Constructed using a Thermally Stable Composite (TSC) material for greater precision and use in wide temperature variations. Additionally, a brass bayonet affords improved mounting accuracy and rigidity. This lens is compatible with the optional Sigma USB Dock for fine-tuning different lens characteristics and updating its firmware. UPC: 085126210540 RED DIGITAL CINEMA DSMC Canon Mount (Aluminum) This aluminum RED Digital Cinema DSMC Canon Mount attaches to your DSMC or DSMC2 camera brain providing an EF/EF-S compatible lens port for your camera. Dual locking rings secure your lens in the mount, minimizing play. The mount features captive screws, so you don't have to worry about accidentally dropping a screw into the sensor cavity. The mount supports electronic communication between the lens and the camera, although not all functions may be supported. RED DSMC mounts are designed to be swapped without requiring a back-focus adjustment. This lens mount is made from aluminum for a balance between weight and strength Captive screws won't get lost Autofocus support available for select EF lenses Electronic iris control available for select EF and EF-S compatible lenses Touch focus enabled for select lenses UPC: 856672007362 RED DIGITAL CINEMA DSMC2 V-LOCK I/O Expander More than just a way to power your camera, the RED DSMC2 V-LOCK I/O Expander provides a variety of input/output connections in addition to a V-Lock mount for your DSMC2 camera. The Expander is made from magnesium, so it is lightweight yet strong. It enables powering your camera from a V-Mount battery or by an alternate DC source via cable, and you can set it to automatically boot your camera up once power is connected. It provides both 3G-SDI and HDMI outputs, as well as control and sync outputs.Built-in USB and auxiliary power outputs enable powering accessories and limiting the number of power splitter and converter boxes hanging from your camera. Audio is not forgotten by RED, and the Expander features both an analog stereo input and a stereo headphone jack. It is compatible with the WEAPON 8K S35, WEAPON 6K, as well as the EPIC/SCARLET-W, and the RAVEN. Auto Boot-Up on Power-On The Expander features a physical switch that allows you to enable the camera to automatically boot up when power is applied. This is a useful feature for when the camera is in a difficult-to-access position. Firmware Since the V-Lock I/O Expander communicates with your camera, and allows electronic signals and video output, it requires that your DSMC2 camera has firmware v6.2.17 or later installed. The Expander simplifies your power and output situation when shooting, and can be removed if you want your camera to have a smaller profile for stash-cam, gimbal, or drone shooting. UPC: 856672007355 RED DIGITAL CINEMA Touch 4.7" LCD for Select DSMC2 RED Cameras Designed for cable-free mounting to select DSMC2 RED cameras, the RED DIGITAL CINEMA Touch 4.7" LCD features 1280 x 720 resolution. The design of the LCD provides good off-axis viewing up to 160°, with 80° left, right, up, or down so you don't have to be directly aligned with the viewfinder to see an optimal image. The LCD features multi-touch control, with hard navigation buttons on the side. With a brightness level of 400 cd/m² and contrast ration of 1000:1 providing a clear image, the RED Touch LCD mounts directly to your camera without any cables needed between the LCD and your camera. It can mount directly onto DSMC2 cameras including the WEAPON 8K S35, WEAPON 6K, EPIC/SCARLET-W, EPIC/SCARLET M-X, EPIC/SCARLET DRAGON, and the RED RAVEN. A built-in mirror and image flip allow for monitoring while upside down for special applications. The LCD is designed to mount directly to select cameras for cable-free operation. Used in conjunction with the optional DSMC2 LEMO Adapter Collection, you can mount your DSMC2 display away from the camera body. The built-in hinge provides up to 240° of tilt—90° forward and 150° back—which allows the LCD to fold flat on your camera. You can use an optional DSMC2 LEMO Adapter B to mount the LCD to RED EPIC or RED SCARLET cameras. UPC: 856672007393 IDX System Technology DUO-C98 96Wh High-Load Battery with D-Tap Advanced, Standard D-Tap & USB Port The IDX DUO-C98 96Wh High-Load Battery with D-Tap Advanced, Standard D-Tap & USB Port features a V-mount and is only 2.3" thick, but packs 96Wh of capacity to power your professional devices. It is well suited for handheld gimbal and aerial applications, as well as run-and-gun productions where size and weight can become an issue. Battery data information displays in most camera's viewfinders. The DUO-C98 can handle a combined load of up to 10A among its V-mount, D-Tap outputs, and USB port. One of the D-Taps can also be used to charge the battery, although that requires an optional charger that is not included. Designed with battery circuit protection against overcharge, over-discharge, over-current, and exposure to high temperatures, providing protection to your battery from the rigors of production. A 5-LED battery life indicator on the side of the battery provides a quick visual indication of charge state of your battery. Key Features Suitable for handheld gimbal, aerial, run-and-gun, and other productions that need a high-power-draw battery in a small package The battery data displays in the viewfinder system of most cameras, and the addition of an SMBUS enables RED cameras to display this information as well Handles up to 10A loads Two unregulated D-tap accessory outputs at 50W each USB port Battery circuit protection 5-LED battery life indicator Fully compatible with all IDX Endura V-mount chargers UPC: 825781012994 IDX System Technology VL-2X 2-Channel V-Mount Charger & Power Supply The VL-2X 2-Channel V-Mount Charger & Power Supply from IDX provides sequential charging for lithium-ion and NiCad batteries, automatically switching to the second battery after fully charging the first. It delivers up to 2.7A of quick-charge current without the noise of a typical charger thanks to a fanless design. It also features a 4-pin XLR power output that offers up to 36W of DC power when the charger is connected to a wall outlet and your batteries are removed. (The DC output is disabled when a battery is charging.) This portable desktop charger is designed with reliable internal safety features that protect both the battery and charger from damage should faulty or misused batteries be placed on the charger. It will automatically stop charging if any attached battery reaches an overvoltage condition. Charge Times for Select IDX Batteries DUO-C190:7 hours for one / 14 hours for twoDUO-150:5 hours for one / 10 hours for twoCUE-D150:5 hours for one / 10 hours for twoELITE:4.5 hours for one / 9.4 hours for twoE-HL10DS:3.4 hours for one / 7.2 hours for twoDUO-C95:3.4 hours for one / 7.2 hours for twoDUO-95:3.3 hours for one / 7 hours for twoCUE-D95:3.3 hours for one / 7 hours for twoE-HL9:3.2 hours for one / 6.4 hours for twoCUE-D75:3 hours for one / 6 hours for twoNP-L7S:3 hours for one / 6 hours for two UPC: 825781012918 G-Technology ev|Series Reader RED MINI-MAG Edition Simplify your RED workflow with G-Technology's ev|Series Reader RED MINI-MAG Edition. This card reader accepts RED's proprietary MINI-MAG SSDs and can connect them to a computer and offer quick upload via USB 3.0 or be integrated into your existing G-Technology Evolution workflow through the SATA connection. UPC: 705487200768 RED DIGITAL CINEMA RED MINI-MAG (480GB) This RED DIGITAL CINEMA RED MINI-MAG has a capacity of 480GB, is compatible with most RED cameras (may require SSD module), and on select cameras can attain write speeds as high as 300 MB/s. The RED MINI-MAG can support simultaneous R3D and Apple ProRes recording, when used with DSMC2 camera systems. RED MINI-MAGs are encased in aluminum and offer a compact form factor Compatible with DSMC2 camera systems, the RED MINI-MAGs require a RED MINI-MAG Side SSD Module for use with your RED EPIC or SCARLET BRAIN. The RED MINI-MAG system requires that your DSMC is on firmware v5.1.34 or later. Maximum Data Rates WEAPON DRAGON (Carbon Fiber): up to 300 MB/sWEAPON DRAGON (Magnesium): up to 225 MB/sEPIC DRAGON: up to 200 MB/sSCARLET DRAGON: up to 72 MB/sSCARLET-W and RAVEN DRAGON: up to 140 MB/s UPC: 085667200703 RED DIGITAL CINEMA DSMC2 Outrigger Handle The RED Digital Cinema DSMC2 Outrigger Handle mounts to your camera's DSMC2 Top Handle Port, giving you a secure support handle while gripping the camera with one hand, leaving your other hand free for lens adjustments. This handle features an integrated start/stop trigger button in an ergonomically molded grip. Secured to your camera via two cap head Allen head screws, the handles integrated electronic connectors create a cable-free connection. The handle also incorporates fourteen 1/4"-20 threaded accessory mounting holes along the top. Ergonomic handle with the word RED molded into the grip Fourteen 1/4"-20 threaded accessory mounting holes Integrated start/stop trigger button Please note that only one handle at a time may be attached to the DSMC2 Top Handle Port RED DIGITAL CINEMA Hard Case for DSCM2 Camera Package (Black) The RED DIGITAL CINEMA Hard Case for DSCM2 Camera Package, in black, features custom-cut foam that holds your DSCM2 with mounted Lens Port, DSMC2 Jetpack Expander or V-Lock I/O Expander, and Sidekick or Sidekick Cover. The foam is also cut to accept the RED Touch 4.7" LCD, an Outrigger Handle, Universal Handle, two MINI-MAGs, three DSMC2 OLPFs or a DSMC Battery Belt Clip, a 150W DSMC AC Power Adapter, and a T20 RED TORX L-Key. Please note that this is just the case and the foam; no other items are included. The case is rated at IP67 for dust and water resistance. Integrated wheels create a gliding experience when rolling. A retractable two-stage handle extends from the case, allowing you to comfortably roll it. The spring-loaded top handle easily pulls up, and then snaps out of the way when released. An integrated pressure equalization valve equalizes the pressure differential between the interior of the case and outside air. This case neatly holds the following components:1 x DSMC2 BRAIN with Integrated Media Bay and the following items attached: DSMC Lens Mount DSMC2 Jetpack Expander or DSMC2 V-Lock I/O Expander DSMC2 Sidekick or DSMC2 Sidekick Cover 1 x DSMC2 RED Touch 4.7" LCD1 x DSMC2 Outrigger Handle1 x DSMC2 Universal Handle2 x RED MINI-MAG3 x DSMC2 OLPFs or 1 x DSMC Battery Belt Clip1 x DSMC AC Power Adapter (150W)1 x RED TORX L-Key T20

RED DSMC2 DRAGON-X CAMERA KIT

Code: 210000005175
$22,500.00
In Stock

Click here to be notified by email when RED DSMC2 DRAGON-X CAMERA KIT becomes available.

  • FREE SHIPPING WITHIN THE CONTINENTAL US ON ORDERS OVER $50

  • WE ARE AUTHORIZED DEALERS FOR ALL BRANDS WE CARRY

  • SHOP OUR STORE WITH CONFIDENCE. SSL ENABLED CHECKOUT

This RED DSMC2 DRAGON-X Camera Kit is part of the RED unified DSMC2 lineup and includes the RED DRAGON-X BRAIN, as well the minimum gear you need to make a functional shooting package. The DRAGON-X BRAIN features a Super35 sensor and can shoot and record at 6K uncropped up to 75 fps. The kit includes the Sigma 18-35mm f/1.8 DC HSM Art Lens and an aluminum Canon EF mount with electrical contacts that pass metadata and allow for electronic control of EF mount lenses. The included V-lock expander module allows you to power the camera and provides HDMI and SDI outputs, as well as other interfaces.

The RED Touch screen mounts directly on the BRAIN with no cables and provides you with a viewing screen, allowing you to set up and control the camera. The IDX batteries power the camera, and the charger allows you to charge both batteries simultaneously. The 480GB RED MINI MAG captures your footage and supports data rates up to 300 MB/s, and the included reader enables transferring your footage off the MINI-MAG. The Outrigger Handle provides a handgrip, and the included case is designed and built to hold your camera and accessories safe during transport and storage.

RED DIGITAL CINEMA DSMC2 BRAIN with DRAGON-X 6K S35 Sensor

Bundling high-performance raw video recording in a compact camera body, the RED DIGITAL CINEMA DSMC2 BRAIN with DRAGON-X 6K S35 Sensor is part of RED's unified DSMC2 lineup. Nearly limitless lens options are available for the DSMC2 system. While this camera requires a separately available lens mount, DSMC lens mounts themselves are offered in different varieties for compatibility with a wide array of lens systems.

REDCODE RAW is the format of choice for DSMC2 cameras. RED's versatile raw codec uses wavelet compression to reduce data rates while maintaining a visually lossless image rendering. This efficient codec can be edited on many available NLE software programs without transcoding; though if you prefer, you can record to ProRes or DNx as well. Lowering the recording resolution allows the sensor to capture higher frame rates for dramatic slow-motion footage. The DSMC2 cameras use sensor windowing to record slow motion in lower resolutions, requiring wider- or smaller-format lenses to compensate for the additional crop. Recording rates range from 12 fps and up, including 24/25/30/48/50/60 fps and higher.

Firmware 7.3.0

With the advent of firmware 7.3.0, the DRAGON-X sensor becomes a 6K sensor with a resolution of 6144 x 3160 that can shoot at up to 75 fps. If your camera does not have Firmware 7.3.0 or later, you can download it from RED Digital Cinema.

DRAGON-X 6K S35 Sensor

The DRAGON-X 6K Super 35mm sensor is a 19.4MP CMOS sensor that features a dynamic range of 16.5+ stops and a resolution of 6144 x 3160.

REDCODE RAW

The cornerstone of RED's workflow is the robust REDCODE RAW file format. Using wavelet compression with ratios ranging from 2:1 to 22:1, REDCODE RAW offers the versatility of raw files without the overwhelming storage requirements of uncompressed image data. Since REDCODE RAW has been around since the days of the RED ONE cinema camera, many common NLE software programs including Adobe Premiere Pro, Blackmagic Design DaVinci Resolve, Apple Final Cut Pro, and Avid Media Composer can import and edit REDCODE RAW footage without transcoding, saving production time in the edit suite. Capture rates range from 12 fps and up, including 24/25/30/48/50/60 fps and higher options.

 

Note: Not all compression ratios are available at all resolutions and frame rates

Apple ProRes and Avid DNx Formats

For projects requiring proxy files or quicker turnaround times than raw files permit, Apple ProRes or Avid DNx formats can be recorded at 4K and 2K resolutions directly to the onboard MINI-MAG media. Since these debayered video files can be recorded alongside the raw files, no extra time is required for transcoding the proxies. Bring the debayered files straight into your NLE and begin editing.

DSMC2 Form Factor

Like the preceding DSMC cameras, RED designed the DSMC2 camera line to be modular to fit a wide range of production workflows. Smaller and lighter than the original DSMC design, when stripped down to the BRAIN itself, you have a high-resolution gimbal workhorse. Likewise, add DSMC2 modules to the rear to gain professional I/O connections and battery power. Many other parts of the DSMC2 design are meant to be interchangeable. Swap out the lens mounts to open up new libraries of lenses. Exchange the included standard OLPF (Optical Low-Pass Filter) for alternative image renderings at the sensor level. Mount an EVF without cables that can get snagged, or use a separately available adapter to attach RED LCDs via LEMO cable. Since the DSMC2 form factor is standardized, any accessories that you have for this DSMC2 body will work with any other DSMC2 body, should you upgrade or acquire an additional body in the future.

Color Management

Supports 33x33x33, 32x32x32, 26x26x26, and 17x17x17 3D LUTs
Variable number of 3D LUT outputs with DSMC2 expander module
User-programmable shaper 1D LUTs
Tetrahedral interpolation, 16-bit processing
UPC: 856672007348

Sigma 18-35mm f/1.8 DC HSM Art Lens for Canon EF

Distinguished by a uniquely fast and versatile design, the Canon EF-mount Sigma 18-35mm f/1.8 DC HSM is an Art-series zoom, covering wide-angle to normal focal lengths. Separating itself from the pack, this zoom features an exceedingly bright f/1.8 constant maximum aperture, which suits its use in difficult lighting conditions and offers impressive depth of field control throughout the zoom range. The optical design incorporates a series of SLD and aspherical elements, which help to achieve high clarity and sharpness by suppressing various aberrations, color fringing, and distortion. A Super Multi-Layer Coating has also been applied, too, which controls lens flare and ghosting for improved contrast and color accuracy. Balancing the optical merits, this 18-35mm also sports an advanced Hyper Sonic Motor, along with an internal focusing design, to promote fast, quiet, and precise autofocus performance.

As part of the Art line within Sigma's Global Vision series, this lens is designed to achieve truly notable optical performance and is ideally suited for creative and artistic applications.
Wide-to-normal zoom is designed for APS-C-format Canon EF-mount cameras and provides a 28.8-56mm equivalent focal length range.
Impressively bright constant f/1.8 maximum aperture is well-suited for working in low-light conditions and also provides greater control over the focus position when using shallow depth of field techniques.
Five Special Low Dispersion (SLD) elements are featured in the optical design and help to reduce color fringing and chromatic aberrations for improved clarity and color accuracy.
Four aspherical elements are used to help limit distortion and spherical aberrations and also contribute to greater overall sharpness and accurate rendering.
A Super Multi-Layer Coating has been applied to lens elements in order to minimize lens flare and ghosting and contribute to producing contrast-rich and color-neutral imagery, even in backlit conditions.
Integrated HSM (Hyper Sonic Motor), along with an internal focusing system, realizes quick and quiet autofocus, which is further complemented by an optimized AF algorithm to produce smoother focusing performance. The HSM also permits full-time manual focus control simply by rotating the focus ring at any time.
Rounded nine-blade diaphragm contributes to a smooth and pleasing bokeh quality.
Constructed using a Thermally Stable Composite (TSC) material for greater precision and use in wide temperature variations. Additionally, a brass bayonet affords improved mounting accuracy and rigidity.
This lens is compatible with the optional Sigma USB Dock for fine-tuning different lens characteristics and updating its firmware.
UPC: 085126210540

RED DIGITAL CINEMA DSMC Canon Mount (Aluminum)

This aluminum RED Digital Cinema DSMC Canon Mount attaches to your DSMC or DSMC2 camera brain providing an EF/EF-S compatible lens port for your camera. Dual locking rings secure your lens in the mount, minimizing play. The mount features captive screws, so you don't have to worry about accidentally dropping a screw into the sensor cavity.

The mount supports electronic communication between the lens and the camera, although not all functions may be supported. RED DSMC mounts are designed to be swapped without requiring a back-focus adjustment.

This lens mount is made from aluminum for a balance between weight and strength
Captive screws won't get lost
Autofocus support available for select EF lenses
Electronic iris control available for select EF and EF-S compatible lenses
Touch focus enabled for select lenses
UPC: 856672007362

RED DIGITAL CINEMA DSMC2 V-LOCK I/O Expander

More than just a way to power your camera, the RED DSMC2 V-LOCK I/O Expander provides a variety of input/output connections in addition to a V-Lock mount for your DSMC2 camera. The Expander is made from magnesium, so it is lightweight yet strong. It enables powering your camera from a V-Mount battery or by an alternate DC source via cable, and you can set it to automatically boot your camera up once power is connected. It provides both 3G-SDI and HDMI outputs, as well as control and sync outputs.

Built-in USB and auxiliary power outputs enable powering accessories and limiting the number of power splitter and converter boxes hanging from your camera. Audio is not forgotten by RED, and the Expander features both an analog stereo input and a stereo headphone jack. It is compatible with the WEAPON 8K S35, WEAPON 6K, as well as the EPIC/SCARLET-W, and the RAVEN.

Auto Boot-Up on Power-On

The Expander features a physical switch that allows you to enable the camera to automatically boot up when power is applied. This is a useful feature for when the camera is in a difficult-to-access position.

Firmware

Since the V-Lock I/O Expander communicates with your camera, and allows electronic signals and video output, it requires that your DSMC2 camera has firmware v6.2.17 or later installed.
The Expander simplifies your power and output situation when shooting, and can be removed if you want your camera to have a smaller profile for stash-cam, gimbal, or drone shooting.
UPC: 856672007355

RED DIGITAL CINEMA Touch 4.7" LCD for Select DSMC2 RED Cameras

Designed for cable-free mounting to select DSMC2 RED cameras, the RED DIGITAL CINEMA Touch 4.7" LCD features 1280 x 720 resolution. The design of the LCD provides good off-axis viewing up to 160°, with 80° left, right, up, or down so you don't have to be directly aligned with the viewfinder to see an optimal image. The LCD features multi-touch control, with hard navigation buttons on the side.

With a brightness level of 400 cd/m² and contrast ration of 1000:1 providing a clear image, the RED Touch LCD mounts directly to your camera without any cables needed between the LCD and your camera. It can mount directly onto DSMC2 cameras including the WEAPON 8K S35, WEAPON 6K, EPIC/SCARLET-W, EPIC/SCARLET M-X, EPIC/SCARLET DRAGON, and the RED RAVEN. A built-in mirror and image flip allow for monitoring while upside down for special applications.

The LCD is designed to mount directly to select cameras for cable-free operation.
Used in conjunction with the optional DSMC2 LEMO Adapter Collection, you can mount your DSMC2 display away from the camera body.
The built-in hinge provides up to 240° of tilt—90° forward and 150° back—which allows the LCD to fold flat on your camera.
You can use an optional DSMC2 LEMO Adapter B to mount the LCD to RED EPIC or RED SCARLET cameras.
UPC: 856672007393

IDX System Technology DUO-C98 96Wh High-Load Battery with D-Tap Advanced, Standard D-Tap & USB Port

The IDX DUO-C98 96Wh High-Load Battery with D-Tap Advanced, Standard D-Tap & USB Port features a V-mount and is only 2.3" thick, but packs 96Wh of capacity to power your professional devices. It is well suited for handheld gimbal and aerial applications, as well as run-and-gun productions where size and weight can become an issue. Battery data information displays in most camera's viewfinders.

The DUO-C98 can handle a combined load of up to 10A among its V-mount, D-Tap outputs, and USB port. One of the D-Taps can also be used to charge the battery, although that requires an optional charger that is not included. Designed with battery circuit protection against overcharge, over-discharge, over-current, and exposure to high temperatures, providing protection to your battery from the rigors of production. A 5-LED battery life indicator on the side of the battery provides a quick visual indication of charge state of your battery.

Key Features

  • Suitable for handheld gimbal, aerial, run-and-gun, and other productions that need a high-power-draw battery in a small package
  • The battery data displays in the viewfinder system of most cameras, and the addition of an SMBUS enables RED cameras to display this information as well
  • Handles up to 10A loads
  • Two unregulated D-tap accessory outputs at 50W each
  • USB port
  • Battery circuit protection
  • 5-LED battery life indicator
  • Fully compatible with all IDX Endura V-mount chargers
UPC: 825781012994

IDX System Technology VL-2X 2-Channel V-Mount Charger & Power Supply

The VL-2X 2-Channel V-Mount Charger & Power Supply from IDX provides sequential charging for lithium-ion and NiCad batteries, automatically switching to the second battery after fully charging the first. It delivers up to 2.7A of quick-charge current without the noise of a typical charger thanks to a fanless design. It also features a 4-pin XLR power output that offers up to 36W of DC power when the charger is connected to a wall outlet and your batteries are removed. (The DC output is disabled when a battery is charging.)

This portable desktop charger is designed with reliable internal safety features that protect both the battery and charger from damage should faulty or misused batteries be placed on the charger. It will automatically stop charging if any attached battery reaches an overvoltage condition.

Charge Times for Select IDX Batteries

DUO-C190:
7 hours for one / 14 hours for two

DUO-150:
5 hours for one / 10 hours for two

CUE-D150:
5 hours for one / 10 hours for two

ELITE:
4.5 hours for one / 9.4 hours for two

E-HL10DS:
3.4 hours for one / 7.2 hours for two

DUO-C95:
3.4 hours for one / 7.2 hours for two

DUO-95:
3.3 hours for one / 7 hours for two

CUE-D95:
3.3 hours for one / 7 hours for two

E-HL9:
3.2 hours for one / 6.4 hours for two

CUE-D75:
3 hours for one / 6 hours for two

NP-L7S:
3 hours for one / 6 hours for two
UPC: 825781012918

G-Technology ev|Series Reader RED MINI-MAG Edition

Simplify your RED workflow with G-Technology's ev|Series Reader RED MINI-MAG Edition. This card reader accepts RED's proprietary MINI-MAG SSDs and can connect them to a computer and offer quick upload via USB 3.0 or be integrated into your existing G-Technology Evolution workflow through the SATA connection.

UPC: 705487200768

RED DIGITAL CINEMA RED MINI-MAG (480GB)

This RED DIGITAL CINEMA RED MINI-MAG has a capacity of 480GB, is compatible with most RED cameras (may require SSD module), and on select cameras can attain write speeds as high as 300 MB/s. The RED MINI-MAG can support simultaneous R3D and Apple ProRes recording, when used with DSMC2 camera systems.

RED MINI-MAGs are encased in aluminum and offer a compact form factor
Compatible with DSMC2 camera systems, the RED MINI-MAGs require a RED MINI-MAG Side SSD Module for use with your RED EPIC or SCARLET BRAIN. The RED MINI-MAG system requires that your DSMC is on firmware v5.1.34 or later.

Maximum Data Rates

WEAPON DRAGON (Carbon Fiber): up to 300 MB/s
WEAPON DRAGON (Magnesium): up to 225 MB/s
EPIC DRAGON: up to 200 MB/s
SCARLET DRAGON: up to 72 MB/s
SCARLET-W and RAVEN DRAGON: up to 140 MB/s
UPC: 085667200703

RED DIGITAL CINEMA DSMC2 Outrigger Handle

The RED Digital Cinema DSMC2 Outrigger Handle mounts to your camera's DSMC2 Top Handle Port, giving you a secure support handle while gripping the camera with one hand, leaving your other hand free for lens adjustments. This handle features an integrated start/stop trigger button in an ergonomically molded grip. Secured to your camera via two cap head Allen head screws, the handles integrated electronic connectors create a cable-free connection. The handle also incorporates fourteen 1/4"-20 threaded accessory mounting holes along the top.

Ergonomic handle with the word RED molded into the grip
Fourteen 1/4"-20 threaded accessory mounting holes
Integrated start/stop trigger button
Please note that only one handle at a time may be attached to the DSMC2 Top Handle Port

RED DIGITAL CINEMA Hard Case for DSCM2 Camera Package (Black)

The RED DIGITAL CINEMA Hard Case for DSCM2 Camera Package, in black, features custom-cut foam that holds your DSCM2 with mounted Lens Port, DSMC2 Jetpack Expander or V-Lock I/O Expander, and Sidekick or Sidekick Cover. The foam is also cut to accept the RED Touch 4.7" LCD, an Outrigger Handle, Universal Handle, two MINI-MAGs, three DSMC2 OLPFs or a DSMC Battery Belt Clip, a 150W DSMC AC Power Adapter, and a T20 RED TORX L-Key. Please note that this is just the case and the foam; no other items are included.

The case is rated at IP67 for dust and water resistance. Integrated wheels create a gliding experience when rolling. A retractable two-stage handle extends from the case, allowing you to comfortably roll it. The spring-loaded top handle easily pulls up, and then snaps out of the way when released. An integrated pressure equalization valve equalizes the pressure differential between the interior of the case and outside air.

This case neatly holds the following components:
1 x DSMC2 BRAIN with Integrated Media Bay and the following items attached:
  • DSMC Lens Mount
  • DSMC2 Jetpack Expander or DSMC2 V-Lock I/O Expander
  • DSMC2 Sidekick or DSMC2 Sidekick Cover
1 x DSMC2 RED Touch 4.7" LCD
1 x DSMC2 Outrigger Handle
1 x DSMC2 Universal Handle
2 x RED MINI-MAG
3 x DSMC2 OLPFs or 1 x DSMC Battery Belt Clip
1 x DSMC AC Power Adapter (150W)
1 x RED TORX L-Key T20

This RED DSMC2 DRAGON-X Camera Kit is part of the RED unified DSMC2 lineup and includes the RED DRAGON-X BRAIN, as well the minimum gear you need to make a functional shooting package. The DRAGON-X BRAIN features a Super35 sensor and can shoot and record at 6K uncropped up to 75 fps. The kit includes the Sigma 18-35mm f/1.8 DC HSM Art Lens and an aluminum Canon EF mount with electrical contacts that pass metadata and allow for electronic control of EF mount lenses. The included V-lock expander module allows you to power the camera and provides HDMI and SDI outputs, as well as other interfaces.

The RED Touch screen mounts directly on the BRAIN with no cables and provides you with a viewing screen, allowing you to set up and control the camera. The IDX batteries power the camera, and the charger allows you to charge both batteries simultaneously. The 480GB RED MINI MAG captures your footage and supports data rates up to 300 MB/s, and the included reader enables transferring your footage off the MINI-MAG. The Outrigger Handle provides a handgrip, and the included case is designed and built to hold your camera and accessories safe during transport and storage.

RED DIGITAL CINEMA DSMC2 BRAIN with DRAGON-X 6K S35 Sensor

Bundling high-performance raw video recording in a compact camera body, the RED DIGITAL CINEMA DSMC2 BRAIN with DRAGON-X 6K S35 Sensor is part of RED's unified DSMC2 lineup. Nearly limitless lens options are available for the DSMC2 system. While this camera requires a separately available lens mount, DSMC lens mounts themselves are offered in different varieties for compatibility with a wide array of lens systems.

REDCODE RAW is the format of choice for DSMC2 cameras. RED's versatile raw codec uses wavelet compression to reduce data rates while maintaining a visually lossless image rendering. This efficient codec can be edited on many available NLE software programs without transcoding; though if you prefer, you can record to ProRes or DNx as well. Lowering the recording resolution allows the sensor to capture higher frame rates for dramatic slow-motion footage. The DSMC2 cameras use sensor windowing to record slow motion in lower resolutions, requiring wider- or smaller-format lenses to compensate for the additional crop. Recording rates range from 12 fps and up, including 24/25/30/48/50/60 fps and higher.

Firmware 7.3.0

With the advent of firmware 7.3.0, the DRAGON-X sensor becomes a 6K sensor with a resolution of 6144 x 3160 that can shoot at up to 75 fps. If your camera does not have Firmware 7.3.0 or later, you can download it from RED Digital Cinema.

DRAGON-X 6K S35 Sensor

The DRAGON-X 6K Super 35mm sensor is a 19.4MP CMOS sensor that features a dynamic range of 16.5+ stops and a resolution of 6144 x 3160.

REDCODE RAW

The cornerstone of RED's workflow is the robust REDCODE RAW file format. Using wavelet compression with ratios ranging from 2:1 to 22:1, REDCODE RAW offers the versatility of raw files without the overwhelming storage requirements of uncompressed image data. Since REDCODE RAW has been around since the days of the RED ONE cinema camera, many common NLE software programs including Adobe Premiere Pro, Blackmagic Design DaVinci Resolve, Apple Final Cut Pro, and Avid Media Composer can import and edit REDCODE RAW footage without transcoding, saving production time in the edit suite. Capture rates range from 12 fps and up, including 24/25/30/48/50/60 fps and higher options.

 

Note: Not all compression ratios are available at all resolutions and frame rates

Apple ProRes and Avid DNx Formats

For projects requiring proxy files or quicker turnaround times than raw files permit, Apple ProRes or Avid DNx formats can be recorded at 4K and 2K resolutions directly to the onboard MINI-MAG media. Since these debayered video files can be recorded alongside the raw files, no extra time is required for transcoding the proxies. Bring the debayered files straight into your NLE and begin editing.

DSMC2 Form Factor

Like the preceding DSMC cameras, RED designed the DSMC2 camera line to be modular to fit a wide range of production workflows. Smaller and lighter than the original DSMC design, when stripped down to the BRAIN itself, you have a high-resolution gimbal workhorse. Likewise, add DSMC2 modules to the rear to gain professional I/O connections and battery power. Many other parts of the DSMC2 design are meant to be interchangeable. Swap out the lens mounts to open up new libraries of lenses. Exchange the included standard OLPF (Optical Low-Pass Filter) for alternative image renderings at the sensor level. Mount an EVF without cables that can get snagged, or use a separately available adapter to attach RED LCDs via LEMO cable. Since the DSMC2 form factor is standardized, any accessories that you have for this DSMC2 body will work with any other DSMC2 body, should you upgrade or acquire an additional body in the future.

Color Management

Supports 33x33x33, 32x32x32, 26x26x26, and 17x17x17 3D LUTs
Variable number of 3D LUT outputs with DSMC2 expander module
User-programmable shaper 1D LUTs
Tetrahedral interpolation, 16-bit processing
UPC: 856672007348

Sigma 18-35mm f/1.8 DC HSM Art Lens for Canon EF

Distinguished by a uniquely fast and versatile design, the Canon EF-mount Sigma 18-35mm f/1.8 DC HSM is an Art-series zoom, covering wide-angle to normal focal lengths. Separating itself from the pack, this zoom features an exceedingly bright f/1.8 constant maximum aperture, which suits its use in difficult lighting conditions and offers impressive depth of field control throughout the zoom range. The optical design incorporates a series of SLD and aspherical elements, which help to achieve high clarity and sharpness by suppressing various aberrations, color fringing, and distortion. A Super Multi-Layer Coating has also been applied, too, which controls lens flare and ghosting for improved contrast and color accuracy. Balancing the optical merits, this 18-35mm also sports an advanced Hyper Sonic Motor, along with an internal focusing design, to promote fast, quiet, and precise autofocus performance.

As part of the Art line within Sigma's Global Vision series, this lens is designed to achieve truly notable optical performance and is ideally suited for creative and artistic applications. Wide-to-normal zoom is designed for APS-C-format Canon EF-mount cameras and provides a 28.8-56mm equivalent focal length range. Impressively bright constant f/1.8 maximum aperture is well-suited for working in low-light conditions and also provides greater control over the focus position when using shallow depth of field techniques. Five Special Low Dispersion (SLD) elements are featured in the optical design and help to reduce color fringing and chromatic aberrations for improved clarity and color accuracy. Four aspherical elements are used to help limit distortion and spherical aberrations and also contribute to greater overall sharpness and accurate rendering. A Super Multi-Layer Coating has been applied to lens elements in order to minimize lens flare and ghosting and contribute to producing contrast-rich and color-neutral imagery, even in backlit conditions. Integrated HSM (Hyper Sonic Motor), along with an internal focusing system, realizes quick and quiet autofocus, which is further complemented by an optimized AF algorithm to produce smoother focusing performance. The HSM also permits full-time manual focus control simply by rotating the focus ring at any time. Rounded nine-blade diaphragm contributes to a smooth and pleasing bokeh quality. Constructed using a Thermally Stable Composite (TSC) material for greater precision and use in wide temperature variations. Additionally, a brass bayonet affords improved mounting accuracy and rigidity. This lens is compatible with the optional Sigma USB Dock for fine-tuning different lens characteristics and updating its firmware. UPC: 085126210540

RED DIGITAL CINEMA DSMC Canon Mount (Aluminum)

This aluminum RED Digital Cinema DSMC Canon Mount attaches to your DSMC or DSMC2 camera brain providing an EF/EF-S compatible lens port for your camera. Dual locking rings secure your lens in the mount, minimizing play. The mount features captive screws, so you don't have to worry about accidentally dropping a screw into the sensor cavity.

The mount supports electronic communication between the lens and the camera, although not all functions may be supported. RED DSMC mounts are designed to be swapped without requiring a back-focus adjustment.

This lens mount is made from aluminum for a balance between weight and strength Captive screws won't get lost Autofocus support available for select EF lenses Electronic iris control available for select EF and EF-S compatible lenses Touch focus enabled for select lenses UPC: 856672007362

RED DIGITAL CINEMA DSMC2 V-LOCK I/O Expander

More than just a way to power your camera, the RED DSMC2 V-LOCK I/O Expander provides a variety of input/output connections in addition to a V-Lock mount for your DSMC2 camera. The Expander is made from magnesium, so it is lightweight yet strong. It enables powering your camera from a V-Mount battery or by an alternate DC source via cable, and you can set it to automatically boot your camera up once power is connected. It provides both 3G-SDI and HDMI outputs, as well as control and sync outputs.

Built-in USB and auxiliary power outputs enable powering accessories and limiting the number of power splitter and converter boxes hanging from your camera. Audio is not forgotten by RED, and the Expander features both an analog stereo input and a stereo headphone jack. It is compatible with the WEAPON 8K S35, WEAPON 6K, as well as the EPIC/SCARLET-W, and the RAVEN.

Auto Boot-Up on Power-On

The Expander features a physical switch that allows you to enable the camera to automatically boot up when power is applied. This is a useful feature for when the camera is in a difficult-to-access position.

Firmware

Since the V-Lock I/O Expander communicates with your camera, and allows electronic signals and video output, it requires that your DSMC2 camera has firmware v6.2.17 or later installed.
The Expander simplifies your power and output situation when shooting, and can be removed if you want your camera to have a smaller profile for stash-cam, gimbal, or drone shooting.
UPC: 856672007355

RED DIGITAL CINEMA Touch 4.7" LCD for Select DSMC2 RED Cameras

Designed for cable-free mounting to select DSMC2 RED cameras, the RED DIGITAL CINEMA Touch 4.7" LCD features 1280 x 720 resolution. The design of the LCD provides good off-axis viewing up to 160°, with 80° left, right, up, or down so you don't have to be directly aligned with the viewfinder to see an optimal image. The LCD features multi-touch control, with hard navigation buttons on the side.

With a brightness level of 400 cd/m² and contrast ration of 1000:1 providing a clear image, the RED Touch LCD mounts directly to your camera without any cables needed between the LCD and your camera. It can mount directly onto DSMC2 cameras including the WEAPON 8K S35, WEAPON 6K, EPIC/SCARLET-W, EPIC/SCARLET M-X, EPIC/SCARLET DRAGON, and the RED RAVEN. A built-in mirror and image flip allow for monitoring while upside down for special applications.

The LCD is designed to mount directly to select cameras for cable-free operation. Used in conjunction with the optional DSMC2 LEMO Adapter Collection, you can mount your DSMC2 display away from the camera body. The built-in hinge provides up to 240° of tilt—90° forward and 150° back—which allows the LCD to fold flat on your camera. You can use an optional DSMC2 LEMO Adapter B to mount the LCD to RED EPIC or RED SCARLET cameras. UPC: 856672007393

IDX System Technology DUO-C98 96Wh High-Load Battery with D-Tap Advanced, Standard D-Tap & USB Port

The IDX DUO-C98 96Wh High-Load Battery with D-Tap Advanced, Standard D-Tap & USB Port features a V-mount and is only 2.3" thick, but packs 96Wh of capacity to power your professional devices. It is well suited for handheld gimbal and aerial applications, as well as run-and-gun productions where size and weight can become an issue. Battery data information displays in most camera's viewfinders.

The DUO-C98 can handle a combined load of up to 10A among its V-mount, D-Tap outputs, and USB port. One of the D-Taps can also be used to charge the battery, although that requires an optional charger that is not included. Designed with battery circuit protection against overcharge, over-discharge, over-current, and exposure to high temperatures, providing protection to your battery from the rigors of production. A 5-LED battery life indicator on the side of the battery provides a quick visual indication of charge state of your battery.

Key Features

  • Suitable for handheld gimbal, aerial, run-and-gun, and other productions that need a high-power-draw battery in a small package
  • The battery data displays in the viewfinder system of most cameras, and the addition of an SMBUS enables RED cameras to display this information as well
  • Handles up to 10A loads
  • Two unregulated D-tap accessory outputs at 50W each
  • USB port
  • Battery circuit protection
  • 5-LED battery life indicator
  • Fully compatible with all IDX Endura V-mount chargers
UPC: 825781012994

IDX System Technology VL-2X 2-Channel V-Mount Charger & Power Supply

The VL-2X 2-Channel V-Mount Charger & Power Supply from IDX provides sequential charging for lithium-ion and NiCad batteries, automatically switching to the second battery after fully charging the first. It delivers up to 2.7A of quick-charge current without the noise of a typical charger thanks to a fanless design. It also features a 4-pin XLR power output that offers up to 36W of DC power when the charger is connected to a wall outlet and your batteries are removed. (The DC output is disabled when a battery is charging.)

This portable desktop charger is designed with reliable internal safety features that protect both the battery and charger from damage should faulty or misused batteries be placed on the charger. It will automatically stop charging if any attached battery reaches an overvoltage condition.

Charge Times for Select IDX Batteries

DUO-C190:
7 hours for one / 14 hours for two

DUO-150:
5 hours for one / 10 hours for two

CUE-D150:
5 hours for one / 10 hours for two

ELITE:
4.5 hours for one / 9.4 hours for two

E-HL10DS:
3.4 hours for one / 7.2 hours for two

DUO-C95:
3.4 hours for one / 7.2 hours for two

DUO-95:
3.3 hours for one / 7 hours for two

CUE-D95:
3.3 hours for one / 7 hours for two

E-HL9:
3.2 hours for one / 6.4 hours for two

CUE-D75:
3 hours for one / 6 hours for two

NP-L7S:
3 hours for one / 6 hours for two
UPC: 825781012918

G-Technology ev|Series Reader RED MINI-MAG Edition

Simplify your RED workflow with G-Technology's ev|Series Reader RED MINI-MAG Edition. This card reader accepts RED's proprietary MINI-MAG SSDs and can connect them to a computer and offer quick upload via USB 3.0 or be integrated into your existing G-Technology Evolution workflow through the SATA connection.

UPC: 705487200768

RED DIGITAL CINEMA RED MINI-MAG (480GB)

This RED DIGITAL CINEMA RED MINI-MAG has a capacity of 480GB, is compatible with most RED cameras (may require SSD module), and on select cameras can attain write speeds as high as 300 MB/s. The RED MINI-MAG can support simultaneous R3D and Apple ProRes recording, when used with DSMC2 camera systems.

RED MINI-MAGs are encased in aluminum and offer a compact form factor Compatible with DSMC2 camera systems, the RED MINI-MAGs require a RED MINI-MAG Side SSD Module for use with your RED EPIC or SCARLET BRAIN. The RED MINI-MAG system requires that your DSMC is on firmware v5.1.34 or later.

Maximum Data Rates

WEAPON DRAGON (Carbon Fiber): up to 300 MB/s
WEAPON DRAGON (Magnesium): up to 225 MB/s
EPIC DRAGON: up to 200 MB/s
SCARLET DRAGON: up to 72 MB/s
SCARLET-W and RAVEN DRAGON: up to 140 MB/s
UPC: 085667200703

RED DIGITAL CINEMA DSMC2 Outrigger Handle

The RED Digital Cinema DSMC2 Outrigger Handle mounts to your camera's DSMC2 Top Handle Port, giving you a secure support handle while gripping the camera with one hand, leaving your other hand free for lens adjustments. This handle features an integrated start/stop trigger button in an ergonomically molded grip. Secured to your camera via two cap head Allen head screws, the handles integrated electronic connectors create a cable-free connection. The handle also incorporates fourteen 1/4"-20 threaded accessory mounting holes along the top.

Ergonomic handle with the word RED molded into the grip Fourteen 1/4"-20 threaded accessory mounting holes Integrated start/stop trigger button Please note that only one handle at a time may be attached to the DSMC2 Top Handle Port

RED DIGITAL CINEMA Hard Case for DSCM2 Camera Package (Black)

The RED DIGITAL CINEMA Hard Case for DSCM2 Camera Package, in black, features custom-cut foam that holds your DSCM2 with mounted Lens Port, DSMC2 Jetpack Expander or V-Lock I/O Expander, and Sidekick or Sidekick Cover. The foam is also cut to accept the RED Touch 4.7" LCD, an Outrigger Handle, Universal Handle, two MINI-MAGs, three DSMC2 OLPFs or a DSMC Battery Belt Clip, a 150W DSMC AC Power Adapter, and a T20 RED TORX L-Key. Please note that this is just the case and the foam; no other items are included.

The case is rated at IP67 for dust and water resistance. Integrated wheels create a gliding experience when rolling. A retractable two-stage handle extends from the case, allowing you to comfortably roll it. The spring-loaded top handle easily pulls up, and then snaps out of the way when released. An integrated pressure equalization valve equalizes the pressure differential between the interior of the case and outside air.

This case neatly holds the following components:
1 x DSMC2 BRAIN with Integrated Media Bay and the following items attached:
  • DSMC Lens Mount
  • DSMC2 Jetpack Expander or DSMC2 V-Lock I/O Expander
  • DSMC2 Sidekick or DSMC2 Sidekick Cover
1 x DSMC2 RED Touch 4.7" LCD
1 x DSMC2 Outrigger Handle
1 x DSMC2 Universal Handle
2 x RED MINI-MAG
3 x DSMC2 OLPFs or 1 x DSMC Battery Belt Clip
1 x DSMC AC Power Adapter (150W)
1 x RED TORX L-Key T20