RED DSMC2® GEMINI® CAMERA KIT RED DSMC2® GEMINI® CAMERA KIT RED Including nearly everything you need to grab your camera and shoot, the DSMC2 GEMINI Camera Kit includes the camera body, lens mount, touchscreen LCD, batteries, and media; you need only supply your own Canon EF Mount lens. The GEMINI camera BRAIN features a 5K, Super35mm-sized, dual native ISO sensor that enables you to shoot in conditions ranging from bright daylight to extremely dim without your images suffering from excessive noise.The included V-lock I/O expander module mounts on the camera BRAIN, providing a way to attach power as well as input and output ports. The touchscreen LCD is needed for camera setup and control, as well as allowing you to see what the camera is shooting. The included IDX DUO-C98 batteries power the GEMINI BRAIN via the V-lock expander module and communicate the battery info to the camera. Once you've set up the camera you can record to the 960GB RED MINI-MAG, supporting recording speeds up to 300 MB/s, and use the included reader to transfer your footage to your computer or download station. The Outrigger Handle provides a support hold for the system. The included case holds all the kit's gear secure during transport and storage. RED DIGITAL CINEMA DSMC2 BRAIN with GEMINI 5K S35 Sensor (2018 Unified DSMC2 Lineup) Bundling high performance raw video recording in a compact camera body, the RED DIGITAL CINEMA DSMC2 BRAIN with GEMINI 5K S35 Sensor is part of the 2018 unified DSMC2 lineup and is designed to be built up the way you want, to tell your story in almost any way possible. Since the DSMC2 form factor is standard, accessories from RED and other manufacturers can be easily attached to accessorize your camera. Even though the GEMINI sensor has fewer photosites than its HELIUM and MONSTRO brethren, it has a cool trick up its sleeve. Using advanced circuitry designed for the aerospace industry, the GEMINI can switch native sensitivities. Practically speaking, it can operate in both normal and dimly lit scenarios without prematurely blown highlights or excessive noise, respectively. Nearly limitless lens options are available for the DSMC2 system. While this camera requires a separately available lens mount, DSMC lens mounts themselves are offered in different varieties for compatibility with a wide array of lens systems. REDCODE RAW is the format of choice for DSMC2 cameras. RED's versatile raw codec uses wavelet compression to reduce data rates while maintaining a visually lossless image rendering. This efficient codec can be edited on many available NLE software programs without transcoding, though if you prefer a proxy workflow, ProRes or DNx files can be recorded simultaneously to the MINI-MAG media. Lowering the recording resolution allows the sensor to capture higher frame rates for dramatic slow-motion footage. The DSMC2 cameras use sensor windowing to record slow motion in lower resolutions, requiring wider or smaller-format lenses to compensate for the additional crop. Recording rates range from 12 fps and up, including 24/25/30/48/50/60 fps and higher. 5K GEMINI S35 Sensor The GEMINI 5K Super 35mm sensor features dual sensitivity modes. Use Standard mode for conventional shooting scenarios. Switch to Low Light mode for increased sensitivity, but without the increased noise floor commonly found through signal manipulation. REDCODE RAW The cornerstone of RED's workflow is the robust REDCODE RAW file format. Using wavelet compression with ratios ranging from 2:1 to 22:1, REDCODE RAW offers the versatility of raw files without the overwhelming storage requirements of uncompressed image data. Since REDCODE RAW has been around since the days of the RED ONE cinema camera, many common NLE software programs including Adobe Premiere Pro, Blackmagic Design DaVinci Resolve, Apple Final Cut Pro, and Avid Media Composer can import and edit REDCODE RAW footage without transcoding, saving production time in the edit suite. Capture rates range from 12 fps and up, including 24/25/30/48/50/60 fps and higher options.   Note: Not all compression ratios are available at all resolutions and frame rates Apple ProRes and Avid DNx Formats For projects requiring proxy files or quicker turnaround times than raw files permit, Apple ProRes or Avid DNx formats can be recorded at 4K and 2K resolutions directly to the onboard MINI-MAG media. Since these debayered video files can be recorded alongside the raw files, no extra time is required for transcoding the proxies. Bring the debayered files straight into your NLE and begin editing. DSMC2 Form Factor Like the preceding DSMC cameras, RED designed the DSMC2 camera line to be modular to fit a wide range of production workflows. Smaller and lighter than the original DSMC design, when stripped down to the BRAIN itself, you have a high-resolution gimbal workhorse. Likewise, add DSMC2 modules to the rear to gain professional I/O connections and battery power. Many other parts of the DSMC2 design are meant to be interchangeable. Swap out the lens mounts to open up new libraries of lenses. Exchange the included standard OLPF (Optical Low-Pass Filter) for alternative image renderings at the sensor level. Mount an EVF without cables that can get snagged, or use a separately available adapter to attach RED LCDs via LEMO cable. Since the DSMC2 form factor is standardized, any accessories that you have for this DSMC2 body will work with any other DSMC2 body, should you upgrade or acquire an additional body in the future. Color Management Supports 33x33x33, 32x32x32, 26x26x26, and 17x17x17 3D LUTsVariable number of 3D LUT outputs with DSMC2 expander moduleUser-programmable shaper 1D LUTsTetrahedral interpolation, 16-bit processing RED DIGITAL CINEMA DSMC Canon Mount (Aluminum) This aluminum RED Digital Cinema DSMC Canon Mount attaches to your DSMC or DSMC2 camera brain providing an EF/EF-S compatible lens port for your camera. Dual locking rings secure your lens in the mount, minimizing play. The mount features captive screws, so you don't have to worry about accidentally dropping a screw into the sensor cavity. The mount supports electronic communication between the lens and the camera, although not all functions may be supported. RED DSMC mounts are designed to be swapped without requiring a back-focus adjustment. This lens mount is made from aluminum for a balance between weight and strength Captive screws won't get lost Autofocus support available for select EF lenses Electronic iris control available for select EF and EF-S compatible lenses Touch focus enabled for select lenses RED DIGITAL CINEMA DSMC2 V-LOCK I/O Expander More than just a way to power your camera, the RED DSMC2 V-LOCK I/O Expander provides a variety of input/output connections in addition to a V-Lock mount for your DSMC2 camera. The Expander is made from magnesium, so it is lightweight yet strong. It enables powering your camera from a V-Mount battery or by an alternate DC source via cable, and you can set it to automatically boot your camera up once power is connected. It provides both 3G-SDI and HDMI outputs, as well as control and sync outputs.Built-in USB and auxiliary power outputs enable powering accessories and limiting the number of power splitter and converter boxes hanging from your camera. Audio is not forgotten by RED, and the Expander features both an analog stereo input and a stereo headphone jack. It is compatible with the WEAPON 8K S35, WEAPON 6K, as well as the EPIC/SCARLET-W, and the RAVEN. Auto Boot-Up on Power-On The Expander features a physical switch that allows you to enable the camera to automatically boot up when power is applied. This is a useful feature for when the camera is in a difficult-to-access position. Firmware Since the V-Lock I/O Expander communicates with your camera, and allows electronic signals and video output, it requires that your DSMC2 camera has firmware v6.2.17 or later installed. The Expander simplifies your power and output situation when shooting, and can be removed if you want your camera to have a smaller profile for stash-cam, gimbal, or drone shooting. RED DIGITAL CINEMA Touch 7.0" LCD for Select DSMC2 RED Cameras (Aluminum) Designed for cable-free mounting to select DSMC2 RED cameras, the RED DIGITAL CINEMA Touch 7.0" LCD (Aluminum) features 1920 x 1136 resolution. The design of the LCD provides good off-axis viewing up to 170°, with 85° left, right, up, or down so you don't have to be directly aligned with the viewfinder to see an optimal image. The LCD features multi-touch control, with hard navigation buttons on the side. With a brightness level of 350 cd/m² and contrast ration of 1000:1 providing a clear image, the RED Touch LCD mounts directly to your camera without any cables needed between the LCD and your camera. It can mount directly onto DSMC2 cameras including the WEAPON 8K S35, WEAPON 6K, EPIC/SCARLET-W, EPIC/SCARLET M-X, EPIC/SCARLET DRAGON, and the RED RAVEN. A built-in mirror and image flip allow for monitoring while upside down for special applications. The LCD is designed to mount directly to select cameras for cable-free operation. Used in conjunction with the optional DSMC2 LEMO Adapter Collection, you can mount your DSMC2 display away from the camera body. The built-in hinge provides up to 180° of tilt—90° forward and 90° back—which allows the LCD to fold flat on your camera. The hinge also enables rotating the display 180°. You can use an optional DSMC2 LEMO Adapter B to mount the LCD to RED EPIC or RED SCARLET cameras. IDX System Technology DUO-C98 96Wh High-Load Battery with D-Tap Advanced, Standard D-Tap & USB Port The IDX DUO-C98 96Wh High-Load Battery with D-Tap Advanced, Standard D-Tap & USB Port features a V-mount and is only 2.3" thick, but packs 96Wh of capacity to power your professional devices. It is well suited for handheld gimbal and aerial applications, as well as run-and-gun productions where size and weight can become an issue. Battery data information displays in most camera's viewfinders. The DUO-C98 can handle a combined load of up to 10A among its V-mount, D-Tap outputs, and USB port. One of the D-Taps can also be used to charge the battery, although that requires an optional charger that is not included. Designed with battery circuit protection against overcharge, over-discharge, over-current, and exposure to high temperatures, providing protection to your battery from the rigors of production. A 5-LED battery life indicator on the side of the battery provides a quick visual indication of charge state of your battery. Key Features Suitable for handheld gimbal, aerial, run-and-gun, and other productions that need a high-power-draw battery in a small package The battery data displays in the viewfinder system of most cameras, and the addition of an SMBUS enables RED cameras to display this information as well Handles up to 10A loads Two unregulated D-tap accessory outputs at 50W each USB port Battery circuit protection 5-LED battery life indicator Fully compatible with all IDX Endura V-mount chargers IDX System Technology VL-2X 2-Channel V-Mount Charger & Power Supply The VL-2X 2-Channel V-Mount Charger & Power Supply from IDX provides sequential charging for lithium-ion and NiCad batteries, automatically switching to the second battery after fully charging the first. It delivers up to 2.7A of quick-charge current without the noise of a typical charger thanks to a fanless design. It also features a 4-pin XLR power output that offers up to 36W of DC power when the charger is connected to a wall outlet and your batteries are removed. (The DC output is disabled when a battery is charging.) This portable desktop charger is designed with reliable internal safety features that protect both the battery and charger from damage should faulty or misused batteries be placed on the charger. It will automatically stop charging if any attached battery reaches an overvoltage condition. Charge Times for Select IDX Batteries DUO-C190:7 hours for one / 14 hours for twoDUO-150:5 hours for one / 10 hours for twoCUE-D150:5 hours for one / 10 hours for twoELITE:4.5 hours for one / 9.4 hours for twoE-HL10DS:3.4 hours for one / 7.2 hours for twoDUO-C95:3.4 hours for one / 7.2 hours for twoDUO-95:3.3 hours for one / 7 hours for twoCUE-D95:3.3 hours for one / 7 hours for twoE-HL9:3.2 hours for one / 6.4 hours for twoCUE-D75:3 hours for one / 6 hours for twoNP-L7S:3 hours for one / 6 hours for two G-Technology ev|Series Reader RED MINI-MAG Edition Simplify your RED workflow with G-Technology's ev|Series Reader RED MINI-MAG Edition. This card reader accepts RED's proprietary MINI-MAG SSDs and can connect them to a computer and offer quick upload via USB 3.0 or be integrated into your existing G-Technology Evolution workflow through the SATA connection. RED DIGITAL CINEMA RED MINI-MAG (960GB) This RED DIGITAL CINEMA RED MINI-MAG has a capacity of 960GB, is compatible with most RED cameras (may require SSD module), and on select cameras can attain write speeds as high as 300 MB/s. The RED MINI-MAG can support simultaneous R3D and Apple ProRes recording, when used with DSMC2 camera systems. RED MINI-MAGs are encased in aluminum and offer a compact form factor Compatible with DSMC2 camera systems, the RED MINI-MAGs require a RED MINI-MAG Side SSD Module for use with your RED EPIC or SCARLET BRAIN. The RED MINI-MAG system requires that your DSMC is on firmware v5.1.34 or later. Maximum Data Rates WEAPON DRAGON (Carbon Fiber): up to 300 MB/sWEAPON DRAGON (Magnesium): up to 225 MB/sEPIC DRAGON: up to 200 MB/sSCARLET DRAGON: up to 72 MB/sSCARLET-W and RAVEN DRAGON: up to 140 MB/s RED DIGITAL CINEMA DSMC2 Outrigger Handle The RED Digital Cinema DSMC2 Outrigger Handle mounts to your camera's DSMC2 Top Handle Port, giving you a secure support handle while gripping the camera with one hand, leaving your other hand free for lens adjustments. This handle features an integrated start/stop trigger button in an ergonomically molded grip. Secured to your camera via two cap head Allen head screws, the handles integrated electronic connectors create a cable-free connection. The handle also incorporates fourteen 1/4"-20 threaded accessory mounting holes along the top. Ergonomic handle with the word RED molded into the grip Fourteen 1/4"-20 threaded accessory mounting holes Integrated start/stop trigger button Please note that only one handle at a time may be attached to the DSMC2 Top Handle Port

RED DSMC2® GEMINI® CAMERA KIT

Code: 210000005176
$27,500.00
In Stock

Click here to be notified by email when RED DSMC2® GEMINI® CAMERA KIT becomes available.

  • FREE SHIPPING WITHIN THE CONTINENTAL US ON ORDERS OVER $50

  • WE ARE AUTHORIZED DEALERS FOR ALL BRANDS WE CARRY

  • SHOP OUR STORE WITH CONFIDENCE. SSL ENABLED CHECKOUT

Including nearly everything you need to grab your camera and shoot, the DSMC2 GEMINI Camera Kit includes the camera body, lens mount, touchscreen LCD, batteries, and media; you need only supply your own Canon EF Mount lens. The GEMINI camera BRAIN features a 5K, Super35mm-sized, dual native ISO sensor that enables you to shoot in conditions ranging from bright daylight to extremely dim without your images suffering from excessive noise.

The included V-lock I/O expander module mounts on the camera BRAIN, providing a way to attach power as well as input and output ports. The touchscreen LCD is needed for camera setup and control, as well as allowing you to see what the camera is shooting. The included IDX DUO-C98 batteries power the GEMINI BRAIN via the V-lock expander module and communicate the battery info to the camera. Once you've set up the camera you can record to the 960GB RED MINI-MAG, supporting recording speeds up to 300 MB/s, and use the included reader to transfer your footage to your computer or download station. The Outrigger Handle provides a support hold for the system. The included case holds all the kit's gear secure during transport and storage.

RED DIGITAL CINEMA DSMC2 BRAIN with GEMINI 5K S35 Sensor (2018 Unified DSMC2 Lineup)

Bundling high performance raw video recording in a compact camera body, the RED DIGITAL CINEMA DSMC2 BRAIN with GEMINI 5K S35 Sensor is part of the 2018 unified DSMC2 lineup and is designed to be built up the way you want, to tell your story in almost any way possible. Since the DSMC2 form factor is standard, accessories from RED and other manufacturers can be easily attached to accessorize your camera. Even though the GEMINI sensor has fewer photosites than its HELIUM and MONSTRO brethren, it has a cool trick up its sleeve. Using advanced circuitry designed for the aerospace industry, the GEMINI can switch native sensitivities. Practically speaking, it can operate in both normal and dimly lit scenarios without prematurely blown highlights or excessive noise, respectively. Nearly limitless lens options are available for the DSMC2 system. While this camera requires a separately available lens mount, DSMC lens mounts themselves are offered in different varieties for compatibility with a wide array of lens systems.

REDCODE RAW is the format of choice for DSMC2 cameras. RED's versatile raw codec uses wavelet compression to reduce data rates while maintaining a visually lossless image rendering. This efficient codec can be edited on many available NLE software programs without transcoding, though if you prefer a proxy workflow, ProRes or DNx files can be recorded simultaneously to the MINI-MAG media. Lowering the recording resolution allows the sensor to capture higher frame rates for dramatic slow-motion footage. The DSMC2 cameras use sensor windowing to record slow motion in lower resolutions, requiring wider or smaller-format lenses to compensate for the additional crop. Recording rates range from 12 fps and up, including 24/25/30/48/50/60 fps and higher.

5K GEMINI S35 Sensor

The GEMINI 5K Super 35mm sensor features dual sensitivity modes. Use Standard mode for conventional shooting scenarios. Switch to Low Light mode for increased sensitivity, but without the increased noise floor commonly found through signal manipulation.

REDCODE RAW

The cornerstone of RED's workflow is the robust REDCODE RAW file format. Using wavelet compression with ratios ranging from 2:1 to 22:1, REDCODE RAW offers the versatility of raw files without the overwhelming storage requirements of uncompressed image data. Since REDCODE RAW has been around since the days of the RED ONE cinema camera, many common NLE software programs including Adobe Premiere Pro, Blackmagic Design DaVinci Resolve, Apple Final Cut Pro, and Avid Media Composer can import and edit REDCODE RAW footage without transcoding, saving production time in the edit suite. Capture rates range from 12 fps and up, including 24/25/30/48/50/60 fps and higher options.

 

Note: Not all compression ratios are available at all resolutions and frame rates

Apple ProRes and Avid DNx Formats

For projects requiring proxy files or quicker turnaround times than raw files permit, Apple ProRes or Avid DNx formats can be recorded at 4K and 2K resolutions directly to the onboard MINI-MAG media. Since these debayered video files can be recorded alongside the raw files, no extra time is required for transcoding the proxies. Bring the debayered files straight into your NLE and begin editing.

DSMC2 Form Factor

Like the preceding DSMC cameras, RED designed the DSMC2 camera line to be modular to fit a wide range of production workflows. Smaller and lighter than the original DSMC design, when stripped down to the BRAIN itself, you have a high-resolution gimbal workhorse. Likewise, add DSMC2 modules to the rear to gain professional I/O connections and battery power. Many other parts of the DSMC2 design are meant to be interchangeable. Swap out the lens mounts to open up new libraries of lenses. Exchange the included standard OLPF (Optical Low-Pass Filter) for alternative image renderings at the sensor level. Mount an EVF without cables that can get snagged, or use a separately available adapter to attach RED LCDs via LEMO cable. Since the DSMC2 form factor is standardized, any accessories that you have for this DSMC2 body will work with any other DSMC2 body, should you upgrade or acquire an additional body in the future.

Color Management

Supports 33x33x33, 32x32x32, 26x26x26, and 17x17x17 3D LUTs
Variable number of 3D LUT outputs with DSMC2 expander module
User-programmable shaper 1D LUTs
Tetrahedral interpolation, 16-bit processing

RED DIGITAL CINEMA DSMC Canon Mount (Aluminum)

This aluminum RED Digital Cinema DSMC Canon Mount attaches to your DSMC or DSMC2 camera brain providing an EF/EF-S compatible lens port for your camera. Dual locking rings secure your lens in the mount, minimizing play. The mount features captive screws, so you don't have to worry about accidentally dropping a screw into the sensor cavity.

The mount supports electronic communication between the lens and the camera, although not all functions may be supported. RED DSMC mounts are designed to be swapped without requiring a back-focus adjustment.

This lens mount is made from aluminum for a balance between weight and strength
Captive screws won't get lost
Autofocus support available for select EF lenses
Electronic iris control available for select EF and EF-S compatible lenses
Touch focus enabled for select lenses

RED DIGITAL CINEMA DSMC2 V-LOCK I/O Expander

More than just a way to power your camera, the RED DSMC2 V-LOCK I/O Expander provides a variety of input/output connections in addition to a V-Lock mount for your DSMC2 camera. The Expander is made from magnesium, so it is lightweight yet strong. It enables powering your camera from a V-Mount battery or by an alternate DC source via cable, and you can set it to automatically boot your camera up once power is connected. It provides both 3G-SDI and HDMI outputs, as well as control and sync outputs.

Built-in USB and auxiliary power outputs enable powering accessories and limiting the number of power splitter and converter boxes hanging from your camera. Audio is not forgotten by RED, and the Expander features both an analog stereo input and a stereo headphone jack. It is compatible with the WEAPON 8K S35, WEAPON 6K, as well as the EPIC/SCARLET-W, and the RAVEN.

Auto Boot-Up on Power-On

The Expander features a physical switch that allows you to enable the camera to automatically boot up when power is applied. This is a useful feature for when the camera is in a difficult-to-access position.

Firmware

Since the V-Lock I/O Expander communicates with your camera, and allows electronic signals and video output, it requires that your DSMC2 camera has firmware v6.2.17 or later installed.
The Expander simplifies your power and output situation when shooting, and can be removed if you want your camera to have a smaller profile for stash-cam, gimbal, or drone shooting.

RED DIGITAL CINEMA Touch 7.0" LCD for Select DSMC2 RED Cameras (Aluminum)

Designed for cable-free mounting to select DSMC2 RED cameras, the RED DIGITAL CINEMA Touch 7.0" LCD (Aluminum) features 1920 x 1136 resolution. The design of the LCD provides good off-axis viewing up to 170°, with 85° left, right, up, or down so you don't have to be directly aligned with the viewfinder to see an optimal image. The LCD features multi-touch control, with hard navigation buttons on the side.

With a brightness level of 350 cd/m² and contrast ration of 1000:1 providing a clear image, the RED Touch LCD mounts directly to your camera without any cables needed between the LCD and your camera. It can mount directly onto DSMC2 cameras including the WEAPON 8K S35, WEAPON 6K, EPIC/SCARLET-W, EPIC/SCARLET M-X, EPIC/SCARLET DRAGON, and the RED RAVEN. A built-in mirror and image flip allow for monitoring while upside down for special applications.

The LCD is designed to mount directly to select cameras for cable-free operation.
Used in conjunction with the optional DSMC2 LEMO Adapter Collection, you can mount your DSMC2 display away from the camera body.
The built-in hinge provides up to 180° of tilt—90° forward and 90° back—which allows the LCD to fold flat on your camera. The hinge also enables rotating the display 180°.
You can use an optional DSMC2 LEMO Adapter B to mount the LCD to RED EPIC or RED SCARLET cameras.

IDX System Technology DUO-C98 96Wh High-Load Battery with D-Tap Advanced, Standard D-Tap & USB Port

The IDX DUO-C98 96Wh High-Load Battery with D-Tap Advanced, Standard D-Tap & USB Port features a V-mount and is only 2.3" thick, but packs 96Wh of capacity to power your professional devices. It is well suited for handheld gimbal and aerial applications, as well as run-and-gun productions where size and weight can become an issue. Battery data information displays in most camera's viewfinders.

The DUO-C98 can handle a combined load of up to 10A among its V-mount, D-Tap outputs, and USB port. One of the D-Taps can also be used to charge the battery, although that requires an optional charger that is not included. Designed with battery circuit protection against overcharge, over-discharge, over-current, and exposure to high temperatures, providing protection to your battery from the rigors of production. A 5-LED battery life indicator on the side of the battery provides a quick visual indication of charge state of your battery.

Key Features

  • Suitable for handheld gimbal, aerial, run-and-gun, and other productions that need a high-power-draw battery in a small package
  • The battery data displays in the viewfinder system of most cameras, and the addition of an SMBUS enables RED cameras to display this information as well
  • Handles up to 10A loads
  • Two unregulated D-tap accessory outputs at 50W each
  • USB port
  • Battery circuit protection
  • 5-LED battery life indicator
  • Fully compatible with all IDX Endura V-mount chargers

IDX System Technology VL-2X 2-Channel V-Mount Charger & Power Supply

The VL-2X 2-Channel V-Mount Charger & Power Supply from IDX provides sequential charging for lithium-ion and NiCad batteries, automatically switching to the second battery after fully charging the first. It delivers up to 2.7A of quick-charge current without the noise of a typical charger thanks to a fanless design. It also features a 4-pin XLR power output that offers up to 36W of DC power when the charger is connected to a wall outlet and your batteries are removed. (The DC output is disabled when a battery is charging.)

This portable desktop charger is designed with reliable internal safety features that protect both the battery and charger from damage should faulty or misused batteries be placed on the charger. It will automatically stop charging if any attached battery reaches an overvoltage condition.

Charge Times for Select IDX Batteries

DUO-C190:
7 hours for one / 14 hours for two

DUO-150:
5 hours for one / 10 hours for two

CUE-D150:
5 hours for one / 10 hours for two

ELITE:
4.5 hours for one / 9.4 hours for two

E-HL10DS:
3.4 hours for one / 7.2 hours for two

DUO-C95:
3.4 hours for one / 7.2 hours for two

DUO-95:
3.3 hours for one / 7 hours for two

CUE-D95:
3.3 hours for one / 7 hours for two

E-HL9:
3.2 hours for one / 6.4 hours for two

CUE-D75:
3 hours for one / 6 hours for two

NP-L7S:
3 hours for one / 6 hours for two

G-Technology ev|Series Reader RED MINI-MAG Edition

Simplify your RED workflow with G-Technology's ev|Series Reader RED MINI-MAG Edition. This card reader accepts RED's proprietary MINI-MAG SSDs and can connect them to a computer and offer quick upload via USB 3.0 or be integrated into your existing G-Technology Evolution workflow through the SATA connection.


RED DIGITAL CINEMA RED MINI-MAG (960GB)

This RED DIGITAL CINEMA RED MINI-MAG has a capacity of 960GB, is compatible with most RED cameras (may require SSD module), and on select cameras can attain write speeds as high as 300 MB/s. The RED MINI-MAG can support simultaneous R3D and Apple ProRes recording, when used with DSMC2 camera systems.

RED MINI-MAGs are encased in aluminum and offer a compact form factor
Compatible with DSMC2 camera systems, the RED MINI-MAGs require a RED MINI-MAG Side SSD Module for use with your RED EPIC or SCARLET BRAIN. The RED MINI-MAG system requires that your DSMC is on firmware v5.1.34 or later.

Maximum Data Rates

WEAPON DRAGON (Carbon Fiber): up to 300 MB/s
WEAPON DRAGON (Magnesium): up to 225 MB/s
EPIC DRAGON: up to 200 MB/s
SCARLET DRAGON: up to 72 MB/s
SCARLET-W and RAVEN DRAGON: up to 140 MB/s

RED DIGITAL CINEMA DSMC2 Outrigger Handle

The RED Digital Cinema DSMC2 Outrigger Handle mounts to your camera's DSMC2 Top Handle Port, giving you a secure support handle while gripping the camera with one hand, leaving your other hand free for lens adjustments. This handle features an integrated start/stop trigger button in an ergonomically molded grip. Secured to your camera via two cap head Allen head screws, the handles integrated electronic connectors create a cable-free connection. The handle also incorporates fourteen 1/4"-20 threaded accessory mounting holes along the top.

Ergonomic handle with the word RED molded into the grip
Fourteen 1/4"-20 threaded accessory mounting holes
Integrated start/stop trigger button
Please note that only one handle at a time may be attached to the DSMC2 Top Handle Port

Including nearly everything you need to grab your camera and shoot, the DSMC2 GEMINI Camera Kit includes the camera body, lens mount, touchscreen LCD, batteries, and media; you need only supply your own Canon EF Mount lens. The GEMINI camera BRAIN features a 5K, Super35mm-sized, dual native ISO sensor that enables you to shoot in conditions ranging from bright daylight to extremely dim without your images suffering from excessive noise.

The included V-lock I/O expander module mounts on the camera BRAIN, providing a way to attach power as well as input and output ports. The touchscreen LCD is needed for camera setup and control, as well as allowing you to see what the camera is shooting. The included IDX DUO-C98 batteries power the GEMINI BRAIN via the V-lock expander module and communicate the battery info to the camera. Once you've set up the camera you can record to the 960GB RED MINI-MAG, supporting recording speeds up to 300 MB/s, and use the included reader to transfer your footage to your computer or download station. The Outrigger Handle provides a support hold for the system. The included case holds all the kit's gear secure during transport and storage.

RED DIGITAL CINEMA DSMC2 BRAIN with GEMINI 5K S35 Sensor (2018 Unified DSMC2 Lineup)

Bundling high performance raw video recording in a compact camera body, the RED DIGITAL CINEMA DSMC2 BRAIN with GEMINI 5K S35 Sensor is part of the 2018 unified DSMC2 lineup and is designed to be built up the way you want, to tell your story in almost any way possible. Since the DSMC2 form factor is standard, accessories from RED and other manufacturers can be easily attached to accessorize your camera. Even though the GEMINI sensor has fewer photosites than its HELIUM and MONSTRO brethren, it has a cool trick up its sleeve. Using advanced circuitry designed for the aerospace industry, the GEMINI can switch native sensitivities. Practically speaking, it can operate in both normal and dimly lit scenarios without prematurely blown highlights or excessive noise, respectively. Nearly limitless lens options are available for the DSMC2 system. While this camera requires a separately available lens mount, DSMC lens mounts themselves are offered in different varieties for compatibility with a wide array of lens systems.

REDCODE RAW is the format of choice for DSMC2 cameras. RED's versatile raw codec uses wavelet compression to reduce data rates while maintaining a visually lossless image rendering. This efficient codec can be edited on many available NLE software programs without transcoding, though if you prefer a proxy workflow, ProRes or DNx files can be recorded simultaneously to the MINI-MAG media. Lowering the recording resolution allows the sensor to capture higher frame rates for dramatic slow-motion footage. The DSMC2 cameras use sensor windowing to record slow motion in lower resolutions, requiring wider or smaller-format lenses to compensate for the additional crop. Recording rates range from 12 fps and up, including 24/25/30/48/50/60 fps and higher.

5K GEMINI S35 Sensor

The GEMINI 5K Super 35mm sensor features dual sensitivity modes. Use Standard mode for conventional shooting scenarios. Switch to Low Light mode for increased sensitivity, but without the increased noise floor commonly found through signal manipulation.

REDCODE RAW

The cornerstone of RED's workflow is the robust REDCODE RAW file format. Using wavelet compression with ratios ranging from 2:1 to 22:1, REDCODE RAW offers the versatility of raw files without the overwhelming storage requirements of uncompressed image data. Since REDCODE RAW has been around since the days of the RED ONE cinema camera, many common NLE software programs including Adobe Premiere Pro, Blackmagic Design DaVinci Resolve, Apple Final Cut Pro, and Avid Media Composer can import and edit REDCODE RAW footage without transcoding, saving production time in the edit suite. Capture rates range from 12 fps and up, including 24/25/30/48/50/60 fps and higher options.

 

Note: Not all compression ratios are available at all resolutions and frame rates

Apple ProRes and Avid DNx Formats

For projects requiring proxy files or quicker turnaround times than raw files permit, Apple ProRes or Avid DNx formats can be recorded at 4K and 2K resolutions directly to the onboard MINI-MAG media. Since these debayered video files can be recorded alongside the raw files, no extra time is required for transcoding the proxies. Bring the debayered files straight into your NLE and begin editing.

DSMC2 Form Factor

Like the preceding DSMC cameras, RED designed the DSMC2 camera line to be modular to fit a wide range of production workflows. Smaller and lighter than the original DSMC design, when stripped down to the BRAIN itself, you have a high-resolution gimbal workhorse. Likewise, add DSMC2 modules to the rear to gain professional I/O connections and battery power. Many other parts of the DSMC2 design are meant to be interchangeable. Swap out the lens mounts to open up new libraries of lenses. Exchange the included standard OLPF (Optical Low-Pass Filter) for alternative image renderings at the sensor level. Mount an EVF without cables that can get snagged, or use a separately available adapter to attach RED LCDs via LEMO cable. Since the DSMC2 form factor is standardized, any accessories that you have for this DSMC2 body will work with any other DSMC2 body, should you upgrade or acquire an additional body in the future.

Color Management

Supports 33x33x33, 32x32x32, 26x26x26, and 17x17x17 3D LUTs
Variable number of 3D LUT outputs with DSMC2 expander module
User-programmable shaper 1D LUTs
Tetrahedral interpolation, 16-bit processing

RED DIGITAL CINEMA DSMC Canon Mount (Aluminum)

This aluminum RED Digital Cinema DSMC Canon Mount attaches to your DSMC or DSMC2 camera brain providing an EF/EF-S compatible lens port for your camera. Dual locking rings secure your lens in the mount, minimizing play. The mount features captive screws, so you don't have to worry about accidentally dropping a screw into the sensor cavity.

The mount supports electronic communication between the lens and the camera, although not all functions may be supported. RED DSMC mounts are designed to be swapped without requiring a back-focus adjustment.

This lens mount is made from aluminum for a balance between weight and strength Captive screws won't get lost Autofocus support available for select EF lenses Electronic iris control available for select EF and EF-S compatible lenses Touch focus enabled for select lenses

RED DIGITAL CINEMA DSMC2 V-LOCK I/O Expander

More than just a way to power your camera, the RED DSMC2 V-LOCK I/O Expander provides a variety of input/output connections in addition to a V-Lock mount for your DSMC2 camera. The Expander is made from magnesium, so it is lightweight yet strong. It enables powering your camera from a V-Mount battery or by an alternate DC source via cable, and you can set it to automatically boot your camera up once power is connected. It provides both 3G-SDI and HDMI outputs, as well as control and sync outputs.

Built-in USB and auxiliary power outputs enable powering accessories and limiting the number of power splitter and converter boxes hanging from your camera. Audio is not forgotten by RED, and the Expander features both an analog stereo input and a stereo headphone jack. It is compatible with the WEAPON 8K S35, WEAPON 6K, as well as the EPIC/SCARLET-W, and the RAVEN.

Auto Boot-Up on Power-On

The Expander features a physical switch that allows you to enable the camera to automatically boot up when power is applied. This is a useful feature for when the camera is in a difficult-to-access position.

Firmware

Since the V-Lock I/O Expander communicates with your camera, and allows electronic signals and video output, it requires that your DSMC2 camera has firmware v6.2.17 or later installed.
The Expander simplifies your power and output situation when shooting, and can be removed if you want your camera to have a smaller profile for stash-cam, gimbal, or drone shooting.

RED DIGITAL CINEMA Touch 7.0" LCD for Select DSMC2 RED Cameras (Aluminum)

Designed for cable-free mounting to select DSMC2 RED cameras, the RED DIGITAL CINEMA Touch 7.0" LCD (Aluminum) features 1920 x 1136 resolution. The design of the LCD provides good off-axis viewing up to 170°, with 85° left, right, up, or down so you don't have to be directly aligned with the viewfinder to see an optimal image. The LCD features multi-touch control, with hard navigation buttons on the side.

With a brightness level of 350 cd/m² and contrast ration of 1000:1 providing a clear image, the RED Touch LCD mounts directly to your camera without any cables needed between the LCD and your camera. It can mount directly onto DSMC2 cameras including the WEAPON 8K S35, WEAPON 6K, EPIC/SCARLET-W, EPIC/SCARLET M-X, EPIC/SCARLET DRAGON, and the RED RAVEN. A built-in mirror and image flip allow for monitoring while upside down for special applications.

The LCD is designed to mount directly to select cameras for cable-free operation. Used in conjunction with the optional DSMC2 LEMO Adapter Collection, you can mount your DSMC2 display away from the camera body. The built-in hinge provides up to 180° of tilt—90° forward and 90° back—which allows the LCD to fold flat on your camera. The hinge also enables rotating the display 180°. You can use an optional DSMC2 LEMO Adapter B to mount the LCD to RED EPIC or RED SCARLET cameras.

IDX System Technology DUO-C98 96Wh High-Load Battery with D-Tap Advanced, Standard D-Tap & USB Port

The IDX DUO-C98 96Wh High-Load Battery with D-Tap Advanced, Standard D-Tap & USB Port features a V-mount and is only 2.3" thick, but packs 96Wh of capacity to power your professional devices. It is well suited for handheld gimbal and aerial applications, as well as run-and-gun productions where size and weight can become an issue. Battery data information displays in most camera's viewfinders.

The DUO-C98 can handle a combined load of up to 10A among its V-mount, D-Tap outputs, and USB port. One of the D-Taps can also be used to charge the battery, although that requires an optional charger that is not included. Designed with battery circuit protection against overcharge, over-discharge, over-current, and exposure to high temperatures, providing protection to your battery from the rigors of production. A 5-LED battery life indicator on the side of the battery provides a quick visual indication of charge state of your battery.

Key Features

  • Suitable for handheld gimbal, aerial, run-and-gun, and other productions that need a high-power-draw battery in a small package
  • The battery data displays in the viewfinder system of most cameras, and the addition of an SMBUS enables RED cameras to display this information as well
  • Handles up to 10A loads
  • Two unregulated D-tap accessory outputs at 50W each
  • USB port
  • Battery circuit protection
  • 5-LED battery life indicator
  • Fully compatible with all IDX Endura V-mount chargers

IDX System Technology VL-2X 2-Channel V-Mount Charger & Power Supply

The VL-2X 2-Channel V-Mount Charger & Power Supply from IDX provides sequential charging for lithium-ion and NiCad batteries, automatically switching to the second battery after fully charging the first. It delivers up to 2.7A of quick-charge current without the noise of a typical charger thanks to a fanless design. It also features a 4-pin XLR power output that offers up to 36W of DC power when the charger is connected to a wall outlet and your batteries are removed. (The DC output is disabled when a battery is charging.)

This portable desktop charger is designed with reliable internal safety features that protect both the battery and charger from damage should faulty or misused batteries be placed on the charger. It will automatically stop charging if any attached battery reaches an overvoltage condition.

Charge Times for Select IDX Batteries

DUO-C190:
7 hours for one / 14 hours for two

DUO-150:
5 hours for one / 10 hours for two

CUE-D150:
5 hours for one / 10 hours for two

ELITE:
4.5 hours for one / 9.4 hours for two

E-HL10DS:
3.4 hours for one / 7.2 hours for two

DUO-C95:
3.4 hours for one / 7.2 hours for two

DUO-95:
3.3 hours for one / 7 hours for two

CUE-D95:
3.3 hours for one / 7 hours for two

E-HL9:
3.2 hours for one / 6.4 hours for two

CUE-D75:
3 hours for one / 6 hours for two

NP-L7S:
3 hours for one / 6 hours for two

G-Technology ev|Series Reader RED MINI-MAG Edition

Simplify your RED workflow with G-Technology's ev|Series Reader RED MINI-MAG Edition. This card reader accepts RED's proprietary MINI-MAG SSDs and can connect them to a computer and offer quick upload via USB 3.0 or be integrated into your existing G-Technology Evolution workflow through the SATA connection.


RED DIGITAL CINEMA RED MINI-MAG (960GB)

This RED DIGITAL CINEMA RED MINI-MAG has a capacity of 960GB, is compatible with most RED cameras (may require SSD module), and on select cameras can attain write speeds as high as 300 MB/s. The RED MINI-MAG can support simultaneous R3D and Apple ProRes recording, when used with DSMC2 camera systems.

RED MINI-MAGs are encased in aluminum and offer a compact form factor Compatible with DSMC2 camera systems, the RED MINI-MAGs require a RED MINI-MAG Side SSD Module for use with your RED EPIC or SCARLET BRAIN. The RED MINI-MAG system requires that your DSMC is on firmware v5.1.34 or later.

Maximum Data Rates

WEAPON DRAGON (Carbon Fiber): up to 300 MB/s
WEAPON DRAGON (Magnesium): up to 225 MB/s
EPIC DRAGON: up to 200 MB/s
SCARLET DRAGON: up to 72 MB/s
SCARLET-W and RAVEN DRAGON: up to 140 MB/s

RED DIGITAL CINEMA DSMC2 Outrigger Handle

The RED Digital Cinema DSMC2 Outrigger Handle mounts to your camera's DSMC2 Top Handle Port, giving you a secure support handle while gripping the camera with one hand, leaving your other hand free for lens adjustments. This handle features an integrated start/stop trigger button in an ergonomically molded grip. Secured to your camera via two cap head Allen head screws, the handles integrated electronic connectors create a cable-free connection. The handle also incorporates fourteen 1/4"-20 threaded accessory mounting holes along the top.

Ergonomic handle with the word RED molded into the grip Fourteen 1/4"-20 threaded accessory mounting holes Integrated start/stop trigger button Please note that only one handle at a time may be attached to the DSMC2 Top Handle Port