ARRI L7-C LE2 LED Fresnel with powerCON Cable (Silver/Blue, Manual Mount)

• 1 x L7-C LED Fresnel
• 1 x Power Cord with Switch: 23'
• LE2: 25% Brighter than previous L7-C
• Beam Angle: 15-50 Degrees
• 7" Fresnel Lens
• 2800-10,000K, Continuously Variable
• Full RGB+W Color Gamut
• Runs with or without Fan
• DMX Control, On-Board Control

 The L7-C LE2 is a "fully tune-able" white light source too, allowing you to match existing fixtures from a warm 2800K to ice-blue 10,000K. The on-board controller allows manual intensity control as well as color temperature and +/- green. Specific color shades and skin tones can be matched through the full gamut color mixing feature. All functions can be controlled via DMX, an ideal feature for broadcast studios. The hybrid cooling system allows for cooling both actively (with a fan) or passively (without a fan) for times when the set needs to be dead quiet. The L7-C LE2's 1000W equivalent output draws only 160W during normal operation, making possible a savings of a 75% over similar output tungsten lights. And low heat means lower AC bills in the studio. You can actually run 9x L7-C LE2's from a 20A, 120VAC outlet as opposed to two 1000W or three 650W standard fixtures. The L7-C requires a separately-purchased power cable.