BENRO A3883TS6PRO AERO 6 PRO TRAVEL ALUMINUM VIDEO TRIPOD KIT BENRO A3883TS6PRO AERO 6 PRO TRAVEL ALUMINUM VIDEO TRIPOD KIT BENRO The A3883 Reverse-Folding Aluminum Travel Tripod with S6Pro Fluid Video Head from Benro features a highly compact travel tripod that can be converted to a monopod, and a compact fluid head with a 65mm flat base that allows moving the head directly to most sliders, jibs, and other support gear. The head supports up to 13.2 lb loads and offers 5+0 steps of counterbalance. The tripod has a center column with a leveling adapter on the end that allows you to adjust the angle of the fluid head without having to readjust the tripod legs. The combination of the reverse-folding design and center column allows the tripod to have a max height of 72" (with the head attached) while being able to fold to a very compact size. Furthermore, the tripod legs are able to spread wide to provide a low-angle minimum height of only 13.4" (also with the head attached). With rubber feet and spikes underneath them, the tripod can be used on virtually all surfaces. To convert it to a monopod, the center column is used as the core component. One of the legs of the tripod unscrews from the tripod and secures to the center column, and together the two form a fully functioning monopod. The S6Pro head features continuous pan and tilt drag and has independent pan and tilt locks. The tilt range is a wide +90/-75°, and the pan range is a full 360°. Some parts of the head are made of magnesium and other parts of aluminum. Virtually the entire head, including its knobs, is made of robust yet lightweight metal. A pan bar is included that can be attached to a rosette adapter on the left or right side of the head, for left- or right-handed users. A camera plate is included that can be adjusted forward/backward to let you find the optimal balance for your camera. A safety lock on the plate ensures that once mounted, the plate won't slip out if you move it too far in either direction. Two camera screws are supplied—1/4"-20 and 3/8"-16—that can be stored underneath the camera plate on the head itself, in dedicated slots. For attaching accessories, there's a 1/4"-20 threaded hole on each side of the head to which you can secure articulating arms.

BENRO A3883TS6PRO AERO 6 PRO TRAVEL ALUMINUM VIDEO TRIPOD KIT

Code: 210000003511
$399.95
In Stock

Click here to be notified by email when BENRO A3883TS6PRO AERO 6 PRO TRAVEL ALUMINUM VIDEO TRIPOD KIT becomes available.

  • FREE SHIPPING WITHIN THE CONTINENTAL US ON ORDERS OVER $50

  • WE ARE AUTHORIZED DEALERS FOR ALL BRANDS WE CARRY

  • SHOP OUR STORE WITH CONFIDENCE. SSL ENABLED CHECKOUT

The A3883 Reverse-Folding Aluminum Travel Tripod with S6Pro Fluid Video Head from Benro features a highly compact travel tripod that can be converted to a monopod, and a compact fluid head with a 65mm flat base that allows moving the head directly to most sliders, jibs, and other support gear. The head supports up to 13.2 lb loads and offers 5+0 steps of counterbalance.

The tripod has a center column with a leveling adapter on the end that allows you to adjust the angle of the fluid head without having to readjust the tripod legs. The combination of the reverse-folding design and center column allows the tripod to have a max height of 72" (with the head attached) while being able to fold to a very compact size. Furthermore, the tripod legs are able to spread wide to provide a low-angle minimum height of only 13.4" (also with the head attached). With rubber feet and spikes underneath them, the tripod can be used on virtually all surfaces. To convert it to a monopod, the center column is used as the core component. One of the legs of the tripod unscrews from the tripod and secures to the center column, and together the two form a fully functioning monopod.

The S6Pro head features continuous pan and tilt drag and has independent pan and tilt locks. The tilt range is a wide +90/-75°, and the pan range is a full 360°. Some parts of the head are made of magnesium and other parts of aluminum. Virtually the entire head, including its knobs, is made of robust yet lightweight metal.

A pan bar is included that can be attached to a rosette adapter on the left or right side of the head, for left- or right-handed users. A camera plate is included that can be adjusted forward/backward to let you find the optimal balance for your camera. A safety lock on the plate ensures that once mounted, the plate won't slip out if you move it too far in either direction. Two camera screws are supplied—1/4"-20 and 3/8"-16—that can be stored underneath the camera plate on the head itself, in dedicated slots. For attaching accessories, there's a 1/4"-20 threaded hole on each side of the head to which you can secure articulating arms.

The A3883 Reverse-Folding Aluminum Travel Tripod with S6Pro Fluid Video Head from Benro features a highly compact travel tripod that can be converted to a monopod, and a compact fluid head with a 65mm flat base that allows moving the head directly to most sliders, jibs, and other support gear. The head supports up to 13.2 lb loads and offers 5+0 steps of counterbalance.

The tripod has a center column with a leveling adapter on the end that allows you to adjust the angle of the fluid head without having to readjust the tripod legs. The combination of the reverse-folding design and center column allows the tripod to have a max height of 72" (with the head attached) while being able to fold to a very compact size. Furthermore, the tripod legs are able to spread wide to provide a low-angle minimum height of only 13.4" (also with the head attached). With rubber feet and spikes underneath them, the tripod can be used on virtually all surfaces. To convert it to a monopod, the center column is used as the core component. One of the legs of the tripod unscrews from the tripod and secures to the center column, and together the two form a fully functioning monopod.

The S6Pro head features continuous pan and tilt drag and has independent pan and tilt locks. The tilt range is a wide +90/-75°, and the pan range is a full 360°. Some parts of the head are made of magnesium and other parts of aluminum. Virtually the entire head, including its knobs, is made of robust yet lightweight metal.

A pan bar is included that can be attached to a rosette adapter on the left or right side of the head, for left- or right-handed users. A camera plate is included that can be adjusted forward/backward to let you find the optimal balance for your camera. A safety lock on the plate ensures that once mounted, the plate won't slip out if you move it too far in either direction. Two camera screws are supplied—1/4"-20 and 3/8"-16—that can be stored underneath the camera plate on the head itself, in dedicated slots. For attaching accessories, there's a 1/4"-20 threaded hole on each side of the head to which you can secure articulating arms.